Peek Tubes | Peek Rods | Peek Pipes in India by Polymat India

POLYETHER ETHER KETONE engineering plastic extruded stock shapes available in PEEK NAT and PEEK CF grades are part of a range of high performance engineering plastic products offered under trade name POLYMAT for machining into industrial components. These products are made using best raw material in modern production facility under strict quality confirming to international standards.

Poly Ether Ether Ketone known, as PEEK is a semi crystalline thermoplastic with high tensile strength, stiffness, good wear resistance, low coefficient of friction, excellent chemical resistance and very low moisture absorption. This broad range of useful properties in addition its ability to retain them over a long period under elevated temperature mechanical stresses and demanding environmental conditions make it a premium engineering plastic of choice for many applications

PEEK is commonly specified for high temperature applications requiring combination of thermal, chemical and combustion properties. Electrical properties of Poly Ether Ether Ketone are not influenced by limited moisture uptake under working conditions. As a result, Poly Ether Ether Ketone exhibits excellent dimensional stability and dielectric properties. Filled grades of Poly Ether Ether Ketone offer enhanced tribiological and other properties for demanding custom application.

PEEK is amenable to standard metal working machine tools and can be fabricated with ease to yield smooth surface finish. Information on technical properties for designers is provided on the back side. More specific data and engineering assistance is available upon request.

Peek is registered brand name for PEEK of Victrex plc.

ADVANTAGES

APPLICATIONS

  • Very High Service Temperature
  • Good Chemical and Hydrolysis Resistance
  • Excellent Dimensional Stability
  • High Mechanical Properties at Elevated Temperatures
  • Good Wear and Frictional Properties
  • Good Insulating Properties
  • Excellent Machinability
  • Automative
  • Electronics
  • Chemical
  • Aero - Space
  • Medical
  • Food
  • Oil Exploration

PEEK Tubes, Rods & Pipes offer:

  • Excellent chemical resistance
  • Very low moisture absorption
  • Inherently good wear and abrasion resistance
  • Unaffected by continuous exposure to hot water or steam

MECHANICAL

PROPERTY TEST METHOD ASTM UNITS PEEK
Tensile Strength D 638 MPa 95
Elongation at Break D 638 % 45
Modulus of Elasticity D 638 MPa 3800
Compressive Strength D 695 MPa 118
Hardness - Rockwell - - http://lab.woodward.edu/bus/Mail/cialis_india.html M 99
Tensile Impact Strength D 256 J/m 60

THERMAL

PROPERTY TEST METHOD ASTM UNITS PEEK
Coefficient Of Linear Thermal Expansion D 696 m/mº K 50 X 10 +6
Melting Point D 2117 ºC 340
Heat Distortion Temperature D 648 - A ºC 150
Max. Service Temperature - ºC 260

ELECTRICAL

PROPERTY TEST METHOD ASTM UNITS PEEK
Dielectric Constant 10 KHz D 150 3.30
Dielectric Strength D 149   Dry KV/mm 19
Volume Resistivity D 257 Ohm.cm > 10 16

MISCELLANEOUS

PROPERTY TEST METHOD ASTM UNITS PEEK
Specific Gravity 1.32
Moisture Absorption - 24 Hrs. / Saturation D 150 % 0.12 / 0.5

 
point
STOCK SHAPES
horizantal
point
MATERIALS
horizantal
point ENQUIRIES
horizantal
point
CONTACT
mob
+91 22 2820 4247
+91 22 2820 4248
bull
Vinit Performance
Polymers Pvt. Ltd.
224/225, Gokul Arcade, 'A' Subhash Road,
Vile Parle (East),
Mumbai 400057, India.
mail
mail@polymatindia.net
horizantal
point INFRASTRUCTURE
horizantal
point
IMAGE GALLERY
horizantal
point
TEAM POLYMAT
STOCK SHAPES
Production of semi finished
shapes like rods, blocks, plates
and tubular bars from range of
engineering plastics and high botbox1
ENGINEERING SOLUTIONS
Material solution for new product
development or application
requires sound engineering
considerations to negotiate botbox2
MACHINING
We undertake machining of
stock shapes as per engineering
design and specified tolerances
using traditional metal working botbox3